Zeolite coated copper foams for heat pumping applications (Articolo in rivista)

Type

• Articolo in rivista (Classe)
• Prodotto della ricerca (Classe)

Label

• Zeolite coated copper foams for heat pumping applications (Articolo in rivista) (literal)

Anno

• 2006-01-01T00:00:00+01:00 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#doi

• 10.1016/j.micromeso.2005.10.045 (literal)

Alternative label

• Bonaccorsi L.; Freni A.; Proverbio E.; Restuccia G.; Russo F. (2006)
  Zeolite coated copper foams for heat pumping applications
  in Microporous and mesoporous materials (Print)
  (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori

• Bonaccorsi L.; Freni A.; Proverbio E.; Restuccia G.; Russo F. (literal)

Pagina inizio

• 7 (literal)

Pagina fine

• 14 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroVolume

• 91 (literal)

Rivista

• Microporous and mesoporous materials (Rivista)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#pagineTotali

• 8 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroFascicolo

• 1-3 (literal)

Note

• Google Scholar (literal)
• Scopu (literal)
• ISI Web of Science (WOS) (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni

• CNR-Istituto di Tecnologie Avanzate per l'Energia \"Nicola Giordano\" 5, I-98126 Messina, Italy (literal)

Titolo

• Zeolite coated copper foams for heat pumping applications (literal)

Abstract

• The preparation of a metal supported in situ grown adsorbent bed for adsorption heat pump applications is discussed. The active phase, the zeolite 4A, was directly grown by hydrothermal synthesis on a on-purpose prepared, open-cell, copper foam. The metal foam was obtained by foaming a mixture of epoxy resin, copper powder and a foaming agent in a microwave oven. Subsequently, the metal/polymer foamed composite was heated up to burn the resin matrix and to sinter the metal powder. The so prepared copper foam was preliminary seeded and then exposed to a low temperature (368 K) hydrothermal synthesis in a reactor flask. The accretion treatment was repeated again and an extensive multilayer zeolite 4A coating covering the copper foam surface was obtained. The coating was characterized by SEM, XRD analysis and water adsorption measurements by a Cahn thermobalance. The results in terms of zeolite water uptake in the range of temperatures (328–493 K) and pressures (10–65 mbar) tested, demonstrated a promising performance of the zeolite/foam composite. (literal)

Prodotto di

• Materiali e componenti per pompe di calore ad adsorbimento (ET.P03.004.001) (Modulo)
• Institute for advanced energy technologies \"Nicola Giordano\" (ITAE) (Istituto)

Autore CNR

• GIOVANNI RESTUCCIA (Unità di personale interno)
• ANGELO FRENI (Persona)
• FABIO RUSSO (Persona)

Insieme di parole chiave

• Parole chiave di "Zeolite coated copper foams for heat pumping applications" (Insieme di parole chiave)

Incoming links:

Autore CNR di

• ANGELO FRENI (Persona)
• GIOVANNI RESTUCCIA (Unità di personale interno)
• FABIO RUSSO (Persona)

Prodotto

• Institute for advanced energy technologies \"Nicola Giordano\" (ITAE) (Istituto)
• Materiali e componenti per pompe di calore ad adsorbimento (ET.P03.004.001) (Modulo)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi

• Microporous and mesoporous materials (Rivista)

Insieme di parole chiave di

• Parole chiave di "Zeolite coated copper foams for heat pumping applications" (Insieme di parole chiave)