Radio-frequency sensor for liquid steel level and flux powder thickness measurement in continuous casting mould (Contributo in atti di convegno)

Type

• Prodotto della ricerca (Classe)
• Contributo in atti di convegno (Classe)

Label

• Radio-frequency sensor for liquid steel level and flux powder thickness measurement in continuous casting mould (Contributo in atti di convegno) (literal)

Anno

• 2012-01-01T00:00:00+01:00 (literal)

Alternative label

• Franco Macci, Fernando Menchetti, Giuseppe Virone, Riccardo Tascone, Massimo Luni, Vincenzo Volponi (2012)
  Radio-frequency sensor for liquid steel level and flux powder thickness measurement in continuous casting mould
  in AISTEch - The Iron and Steel Technology Conference and Exposition, Atlanta, GA, 7-10 May 2012
  (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori

• Franco Macci, Fernando Menchetti, Giuseppe Virone, Riccardo Tascone, Massimo Luni, Vincenzo Volponi (literal)

Note

• Scopu (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni

• Centro Sviluppo Materiali S.p.A. (CSM) ,Via di Castel Romano, 100, 00128 Rome, Italy, Consiglio Nazionale delle Ricerche, Istituto di Elettronica e di Ingegneria dell'Informazione e delle Telecomunicazioni(CNR-IEIIT), Corso Duca degli Abruzzi, 24, 10129 Torino, Italy 3OriMartin S.p.A., via Cosimo Canovetti, 13, 25128, Brescia, Italy (literal)

Titolo

• Radio-frequency sensor for liquid steel level and flux powder thickness measurement in continuous casting mould (literal)

Abstract

• An innovative sensor for both liquid steel level control and flux powder thickness measurement in continuous casting mould has been developed. The sensor technology is based on radio-frequency wave resonating in a semi-closed cavity (RF sensor). The sensor was preliminary tested in laboratory equipment simulating liquid steel with a low melting temperature metallic alloy. Industrial tests were carried out on billet continuous casting machine in which the repeatability of the measurement and the reliability of the measurement and the reliability of the equipment was shown. The system is based on relatively cheap components with respect with the current ones, and it is able to measure with adequate precision and quickly the powder layer at meniscus also in presence of level variations. (literal)

Prodotto di

• Sistemi e dispositivi per le tecnologie dell'informazione (ICT.P07.001.001) (Modulo)
• Institute of Electronics, Computer and Telecommunication Engineering (IEIIT) (Istituto)

Autore CNR

• RICCARDO TASCONE (Unità di personale interno)
• GIUSEPPE VIRONE (Unità di personale interno)

Incoming links:

Prodotto

• Institute of Electronics, Computer and Telecommunication Engineering (IEIIT) (Istituto)
• Sistemi e dispositivi per le tecnologie dell'informazione (ICT.P07.001.001) (Modulo)

Autore CNR di

• GIUSEPPE VIRONE (Unità di personale interno)
• RICCARDO TASCONE (Unità di personale interno)