Effect of Perfluoether Concentration and Curing Protocol on Morphology and Mechanical Properties of Toughened TGDDM/MNA Resin Systems (Articolo in rivista)

Type
Label
  • Effect of Perfluoether Concentration and Curing Protocol on Morphology and Mechanical Properties of Toughened TGDDM/MNA Resin Systems (Articolo in rivista) (literal)
Anno
  • 2003-01-01T00:00:00+01:00 (literal)
Alternative label
  • Ragosta G., Musto P., Scarinzi G., Mascia L. (2003)
    Effect of Perfluoether Concentration and Curing Protocol on Morphology and Mechanical Properties of Toughened TGDDM/MNA Resin Systems
    in Polymer (Guildford)
    (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori
  • Ragosta G., Musto P., Scarinzi G., Mascia L. (literal)
Pagina inizio
  • 2081 (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#altreInformazioni
  • E’ stato affrontato il problema della elevata fragilità delle resine epossidiche tetrafunzionali che sono le matrici più utilizzate per la fabbricazione di compositi strutturali impiegati nell’industria aeronautica ed aerospaziale. Questa deficienza è stata notevolmente ridotta senza alterare significativamente le caratteristiche di maggiore rilevanza della matrice epossidica che sono un elevato modulo di elasticità ed una eccezionale stabilità termica e termo-ossidativa. Impact factor 2004: 2.340. (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroVolume
  • 44 (literal)
Rivista
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#note
  • No. Citazione=0; Autocitazione=0; Motore utilizzato per le citazioni=Google Scholar. (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#descrizioneSinteticaDelProdotto
  • Fluoro-oligomeri telechelici, opportunamente funzionalizzati con gruppi carbossilici terminali, sono stati impiegati come agenti tenacizzanti di resine epossidiche tetrafunzionali. La scelta di questi particolari elastomeri è dovuta alla loro notevole compatibilità con la matrice termoindurente e alla loro maggiore stabilità termica rispetto agli elastomeri tenacizzanti convenzionali. Variando opportunamente le condizioni di processo sono stati ottenuti due diverse tipologie di materiali: sistemi a fasi co-continue del tipo IPN (Interpenetrating Polymer Network) e sistemi a separazione di fase. Misure di meccanica della frattura condotte su entrambi i sistemi hanno evidenziato che per concentrazioni di fluoro-oligomero inferiori al 10 wt% la tenacità, valutata attraverso i parametri Kc e Gc, è superiore per il sistema a separazione di fase. A concentrazioni maggiori i due sistemi presentano valori simili di resistenza a frattura e circa cinque volte superiori al valore della resina pura. Studi morfologici, mediante microscopia elettronica a scansione (SEM) e microscopia a forza atomica (AFM), hanno evidenziato che il principale meccanismo di deformazione responsabile dell’aumento di tenacità è un processo di snervamento localizzato e/o generalizzato della matrice epossidica attivato dal componente elastomerico. (literal)
Note
  • ISI Web of Science (WOS) (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni
  • CNR, University of Loughborough UK. (literal)
Titolo
  • Effect of Perfluoether Concentration and Curing Protocol on Morphology and Mechanical Properties of Toughened TGDDM/MNA Resin Systems (literal)
Abstract
  • Previous published work has shown that hydroxyl terminated perfluoroether oligomers can be suitably modified and functionalised to make them miscible with epoxy resins in the uncured state. The reaction conditions can adjusted to induce phase separation either through spinodal decomposition to produce an IPN type morphology, or by nucleation and growth if a dispersed-particle microstructure is required. In the present work we examine the relative toughening enhancement efficiency of the two possible heterophase morphologies. Both systems show a sigmoidal increase in fracture toughness, with increasing concentration of the perfluoroether modifier. However, this takes place at much lower modifier concentrations for the systems with a particulate morphology (about 3.5% w/w) than for IPN systems (about 7.5% w/w). The maximum fracture toughness achievable for the two systems, on the other hand, is very similar and coincides with the concentration at which co-continuous phases are formed. These differences in morphology, however, are not reflected in the variation of modulus and compressive yield strength with increasing concentration of perfluoroether modifier, in so far as both systems exhibit a gradual and small reduction in property with increasing concentration. Furthermore, the dynamic mechanical spectra of the two systems are very different, but the changes resulting from increasing the concentration of toughening agent are relatively small in either case. Nanoindentation tests indicate that it is the local plasticity, brought about by the presence of the softer perfluoroether phase, which is responsible for the enhancement of fracture toughness. This is corroborated by AFM examinations, which reveal local plastic deformations in the regions surrounding the softer particles. (literal)
Prodotto di
Autore CNR
Insieme di parole chiave

Incoming links:


Autore CNR di
Prodotto
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi
Insieme di parole chiave di
data.CNR.it