Composites science and technology
- Label
- Composites science and technology (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi
- The effect of the aspect ratio of carbon nanotubes on their effective reinforcement modulus in an epoxy matrix (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Hybrid composite scaffolds prepared by sol-gel method for bone regeneration (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- The role of reduced graphene oxide on chemical, mechanical and barrier properties of natural rubber composites (Articolo in rivista) (Prodotto della ricerca)
- Quantitative optical analysis of filler dispersion degree in MWCNT-epoxy nanocomposite (Articolo in rivista) (Prodotto della ricerca)
- Real time monitoring of cure and gelification of a thermoset matrix. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Novel 3D porous multi-phase composite scaffolds based on PCL, thermoplastic zein and ha prepared via supercritical CO2 foaming for bone regeneration (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A numerical model for delamination growth simulation in non-crimp fabric composites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effect of residual stresses on the fracture behaviour of notched laminated composites loaded in flexural geometry (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Mechanical properties and modelling of a hydrophilic composite used as a biomaterial (Articolo in rivista) (Prodotto della ricerca)
- Toward the microstructure-properties relationship in MWCNT/epoxy composites: Percolation behavior and dielectric spectroscopy (Articolo in rivista) (Prodotto della ricerca)
- ToF-SIMS investigation of the thermally induced processes at the surface of polyester based polymer blends (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effect of processing conditions on the impregnation of glass fibre mat in extrusion/calendering and film stacking operations (Articolo in rivista) (Prodotto della ricerca)
- Continuous fibre reinforced polymers as connective tissue replacement (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Fast nonlinear refractive index of pure and alloy metallic nanoclusters in silica glass (Articolo in rivista) (Prodotto della ricerca)
- Morphology and degradation properties of pcl/hyaff11-based composite scaffolds with multiscale degradation rate (Articolo in rivista) (Prodotto della ricerca)
- Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composites (Articolo in rivista) (Prodotto della ricerca)
- Functionalization, Compatibilization and Properties of Polypropylene Composites with Hemp Fibres (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A green approach to magnetically-hard electrically-conducting polyaniline/CoFe2O4 nanocomposites (Articolo in rivista) (Prodotto della ricerca)
- Method of quantitative analysis of filler dispersion in composite systems with spherical inclusions (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- An acoustic-emission characterization of the failure modes in polymer-composite materials (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Poly (epsilon-caprolactone)-based nanocomposites: Influence of compatibilization on properties of poly (e-caprolactone)-silica nanocomposites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Modeling of ceramic particles filled polymer-matrix nanocomposites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Supermolecular structure and thermal properties of poly(ethylene terephtahalate)/lignin composites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Progress in the fabrication of ultra-high-temperature ceramics: ''in situ'' synthesis, microstructure and properties of a reactive hot-pressed HfB2-SiC composite (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A stiffness volume averaging based approach to model non-crimp fabric reinforced composites (Articolo in rivista) (Prodotto della ricerca)
- Alternative label
- Composites science and technology. (literal)
- Compos. sci. technol. (literal)
- Language
- eng (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#issn
- 0266-3538 (literal)
- Preferred label
- Composites science and technology (literal)
- Publisher
- Elsevier Applied Science, Barking : GBR (literal)
Incoming links:
- Rivista
- Real time monitoring of cure and gelification of a thermoset matrix. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Functionalization, Compatibilization and Properties of Polypropylene Composites with Hemp Fibres (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Morphology and degradation properties of pcl/hyaff11-based composite scaffolds with multiscale degradation rate (Articolo in rivista) (Prodotto della ricerca)
- The effect of the aspect ratio of carbon nanotubes on their effective reinforcement modulus in an epoxy matrix (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- ToF-SIMS investigation of the thermally induced processes at the surface of polyester based polymer blends (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Poly (epsilon-caprolactone)-based nanocomposites: Influence of compatibilization on properties of poly (e-caprolactone)-silica nanocomposites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Modeling of ceramic particles filled polymer-matrix nanocomposites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effect of processing conditions on the impregnation of glass fibre mat in extrusion/calendering and film stacking operations (Articolo in rivista) (Prodotto della ricerca)
- Continuous fibre reinforced polymers as connective tissue replacement (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Mechanical properties and modelling of a hydrophilic composite used as a biomaterial (Articolo in rivista) (Prodotto della ricerca)
- An acoustic-emission characterization of the failure modes in polymer-composite materials (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composites (Articolo in rivista) (Prodotto della ricerca)
- A numerical model for delamination growth simulation in non-crimp fabric composites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Hybrid composite scaffolds prepared by sol-gel method for bone regeneration (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Novel 3D porous multi-phase composite scaffolds based on PCL, thermoplastic zein and ha prepared via supercritical CO2 foaming for bone regeneration (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Progress in the fabrication of ultra-high-temperature ceramics: ''in situ'' synthesis, microstructure and properties of a reactive hot-pressed HfB2-SiC composite (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Supermolecular structure and thermal properties of poly(ethylene terephtahalate)/lignin composites (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effect of residual stresses on the fracture behaviour of notched laminated composites loaded in flexural geometry (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Quantitative optical analysis of filler dispersion degree in MWCNT-epoxy nanocomposite (Articolo in rivista) (Prodotto della ricerca)
- A stiffness volume averaging based approach to model non-crimp fabric reinforced composites (Articolo in rivista) (Prodotto della ricerca)
- Fast nonlinear refractive index of pure and alloy metallic nanoclusters in silica glass (Articolo in rivista) (Prodotto della ricerca)
- Method of quantitative analysis of filler dispersion in composite systems with spherical inclusions (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- The role of reduced graphene oxide on chemical, mechanical and barrier properties of natural rubber composites (Articolo in rivista) (Prodotto della ricerca)
- Toward the microstructure-properties relationship in MWCNT/epoxy composites: Percolation behavior and dielectric spectroscopy (Articolo in rivista) (Prodotto della ricerca)
- A green approach to magnetically-hard electrically-conducting polyaniline/CoFe2O4 nanocomposites (Articolo in rivista) (Prodotto della ricerca)