Dental materials
- Label
- Dental materials (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi
- The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices. (Articolo in rivista) (Prodotto della ricerca)
- Substantivity of chlorhexidine to human dentin. (Articolo in rivista) (Prodotto della ricerca)
- Effect of adhesive hydrophilicity and curing time on the permeability of resins bonded to water vs. ethanol-saturated acid-etched dentin. (Articolo in rivista) (Prodotto della ricerca)
- Degree of conversion of Filtek Silorane Adhesive System and Clearfil SE Bond within the hybrid and adhesive layer: An in situ Raman analysis. (Articolo in rivista) (Prodotto della ricerca)
- Influence of chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends. (Articolo in rivista) (Prodotto della ricerca)
- Chlorhexidine binding to mineralized versus demineralized dentin powder. (Articolo in rivista) (Prodotto della ricerca)
- Phosphoric acid esters cannot replace polyvinylphosphonic acid as phosphoprotein analogs in biomimetic remineralization of resin-bonded dentin. (Articolo in rivista) (Prodotto della ricerca)
- Effects of residual ethanol on the rate and degree of conversion of five experimental resins. (Articolo in rivista) (Prodotto della ricerca)
- Contraction stress of low-shrinkage composite materials assessed with different testing systems. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Fast curing of restorative materials through the soft light energy release (Articolo in rivista) (Prodotto della ricerca)
- The use of sodium trimetaphosphate as a biomimetic analog of matrix phosphoproteins for remineralization of artificial caries-like dentin. (Articolo in rivista) (Prodotto della ricerca)
- Use of a specific MMP-inhibitor (galardin) for preservation of hybrid layer. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Identification of glutathione-methacrylates adducts in gingival fibroblasts and erythrocytes by HPLC-MS and capillary electrophoresis (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Chlorhexidine stabilizes the adhesive interface: A 2-year in vitro study. (Articolo in rivista) (Prodotto della ricerca)
- Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effects of pH, ionic strength, and applied voltage on migration of dental monomers in an organic matrix. (Articolo in rivista) (Prodotto della ricerca)
- Inhibition of MMPs by alcohols. (Articolo in rivista) (Prodotto della ricerca)
- Flowability of composites is no guarantee for contraction stress reduction. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- State of the art etch-and-rinse adhesives. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Identification of glutathione-methacrylates adducts in gingival fibroblasts and erythrocytes by HPLC-MS and capillary electrophoresis (Articolo in rivista) (Prodotto della ricerca)
- Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Electrical properties of resin monomers used in restorative dentistry. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Kinetics of polymerization and contraction stress development in self-adhesive resin cements. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Interfacial nanoleakage and internal cement thickness of three esthetic crown systems. (Articolo in rivista) (Prodotto della ricerca)
- Leucite-reinforced glass ceramic inlays luted with self-adhesive resin cement: a 2-year in vivo study. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Sandblasted-acid-etched titanium surface influences in vitro the biological behavior of SaOS-2 human osteoblast-like cells. (Articolo in rivista) (Prodotto della ricerca)
- Degree of conversion of resin blends in relation to ethanol content and hydrophilicity. (Articolo in rivista) (Prodotto della ricerca)
- In vitro cellular detoxification of triethylene glycol dimethacrylate by adduct formation with N-acetylcysteine (Articolo in rivista) (Prodotto della ricerca)
- Alternative label
- Dental materials. (literal)
- Dent. mater. (literal)
- Language
- eng (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#issn
- 0109-5641 (literal)
- Preferred label
- Dental materials (literal)
- Publisher
- Munksgaard, Copenhagen : NLD (literal)
Incoming links:
- Rivista
- Flowability of composites is no guarantee for contraction stress reduction. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Chlorhexidine binding to mineralized versus demineralized dentin powder. (Articolo in rivista) (Prodotto della ricerca)
- Contraction stress of low-shrinkage composite materials assessed with different testing systems. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Inhibition of MMPs by alcohols. (Articolo in rivista) (Prodotto della ricerca)
- Identification of glutathione-methacrylates adducts in gingival fibroblasts and erythrocytes by HPLC-MS and capillary electrophoresis (Articolo in rivista) (Prodotto della ricerca)
- Effect of adhesive hydrophilicity and curing time on the permeability of resins bonded to water vs. ethanol-saturated acid-etched dentin. (Articolo in rivista) (Prodotto della ricerca)
- Degree of conversion of Filtek Silorane Adhesive System and Clearfil SE Bond within the hybrid and adhesive layer: An in situ Raman analysis. (Articolo in rivista) (Prodotto della ricerca)
- Influence of chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends. (Articolo in rivista) (Prodotto della ricerca)
- Chlorhexidine stabilizes the adhesive interface: A 2-year in vitro study. (Articolo in rivista) (Prodotto della ricerca)
- Use of a specific MMP-inhibitor (galardin) for preservation of hybrid layer. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Substantivity of chlorhexidine to human dentin. (Articolo in rivista) (Prodotto della ricerca)
- The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices. (Articolo in rivista) (Prodotto della ricerca)
- The use of sodium trimetaphosphate as a biomimetic analog of matrix phosphoproteins for remineralization of artificial caries-like dentin. (Articolo in rivista) (Prodotto della ricerca)
- Effects of pH, ionic strength, and applied voltage on migration of dental monomers in an organic matrix. (Articolo in rivista) (Prodotto della ricerca)
- Fast curing of restorative materials through the soft light energy release (Articolo in rivista) (Prodotto della ricerca)
- Sandblasted-acid-etched titanium surface influences in vitro the biological behavior of SaOS-2 human osteoblast-like cells. (Articolo in rivista) (Prodotto della ricerca)
- Degree of conversion of resin blends in relation to ethanol content and hydrophilicity. (Articolo in rivista) (Prodotto della ricerca)
- Phosphoric acid esters cannot replace polyvinylphosphonic acid as phosphoprotein analogs in biomimetic remineralization of resin-bonded dentin. (Articolo in rivista) (Prodotto della ricerca)
- Effects of residual ethanol on the rate and degree of conversion of five experimental resins. (Articolo in rivista) (Prodotto della ricerca)
- Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- State of the art etch-and-rinse adhesives. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Interfacial nanoleakage and internal cement thickness of three esthetic crown systems. (Articolo in rivista) (Prodotto della ricerca)
- Identification of glutathione-methacrylates adducts in gingival fibroblasts and erythrocytes by HPLC-MS and capillary electrophoresis (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Electrical properties of resin monomers used in restorative dentistry. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Kinetics of polymerization and contraction stress development in self-adhesive resin cements. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Leucite-reinforced glass ceramic inlays luted with self-adhesive resin cement: a 2-year in vivo study. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- In vitro cellular detoxification of triethylene glycol dimethacrylate by adduct formation with N-acetylcysteine (Articolo in rivista) (Prodotto della ricerca)