Sensors and actuators. A, Physical
- Label
- Sensors and actuators. A, Physical (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi
- Accurate high-resolution fiber-optic distributed strain measurements for structural health monitoring (Articolo in rivista) (Prodotto della ricerca)
- Dual frequency PECVD silicon nitride for fabrication of CMUTs' membranes (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Growth of piezoelectric thin films with fine grain microstructure by high energy pulsed laser deposition (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A measurement technique for thermoelectric power of CMOS layers at the wafer level (Articolo in rivista) (Prodotto della ricerca)
- Modeling and characterization of piezoelectric transducers by means of scattering parameters. Part I: Theory (Articolo in rivista) (Prodotto della ricerca)
- Modeling and characterization of piezoelectric transducers by means of scattering parameters. Part II: Application on colloidal suspension monitoring (Articolo in rivista) (Prodotto della ricerca)
- Capacitive micromachined ultrasonic transducer with an open-cells structure (Articolo in rivista) (Prodotto della ricerca)
- Electrochemical etching in HF solution for silicon micromachining (Articolo in rivista) (Prodotto della ricerca)
- Flexible PVDF-TrFE pyroelectric sensor driven by polysilicon thin film transistor fabricated on ultra-thin polyimide substrate (Articolo in rivista) (Prodotto della ricerca)
- The high potential of shape memory alloys in developing miniature mechanical devices: a review on shape memory alloy mini-actuators (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effects of gas type on the sensitivity and transition pressure of integrated thermal flow sensors (Articolo in rivista) (Prodotto della ricerca)
- Measurements and modeling of pulsed mode flow meter for liquids based on a single chip probe (Articolo in rivista) (Prodotto della ricerca)
- A study of highly c-axis oriented AlN films for diamond-based surface acoustic wave devices: Bulk structure and surface morphology (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- High temperature characterization of GaN-based photodetectors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Electromechanical characterisation of dielectric elastomer planar actuator: comparative evaluation of different electrode materials and different counterloads (Articolo in rivista) (Prodotto della ricerca)
- Thermal characterization of a microheater for micromachined gas sensors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Numerical study of a ferrule-top cantilever optical fiber sensor for wind-tunnel applications and comparison with experimental results (Articolo in rivista) (Prodotto della ricerca)
- Automatic compensation of pressure effects on smart flow sensors in the analog and digital domain (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Magneto-piezoresistance in Magnetorheological elastomers for magnetic induction gradient or position sensors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Thermal conductivity detector compact Spice model based on experimental measurements and 3D simulations (Articolo in rivista) (Prodotto della ricerca)
- Magnetoelastic sensor application in civil buildings monitoring (Articolo in rivista) (Prodotto della ricerca)
- Real time oil control by surface plasmon resonance transduction methodology (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- An extended-range fibre optic pH sensor (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- An optical-fiber sensor for the measurement of the size and density of monodisperse particulates (Articolo in rivista) (Prodotto della ricerca)
- Fiber Bragg Grating sensors to measure the coefficient of thermal expansion of polymers at cryogenic temperatures (Articolo in rivista) (Prodotto della ricerca)
- On the relationship between the temperature coefficient of resistance and the thermal conductance of integrated metal resistors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Flexible tag datalogger for food logistics (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Environmental monitoring system compliant with the IEEE 1451 standard and featuring a simplified transducer interface (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A flow sensor for liquids based on a single temperature sensor operated in pulsed mode (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Offset Voltage Evaluation of Analog Blocks in a Configurable Mixed Architecture for Smart Capacitive Sensor Applications (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Sensitivity improvement of integrated thermal anemometers obtained by jet flow impingement (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A double heater integrated gas flow sensor with thermal feedback (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Giant resistivity change induced by strain in a composite of conducting particles in an elastomer matrix (Articolo in rivista) (Prodotto della ricerca)
- Microfabrication of sharp blazed gratings by a two-step height amplification process based on soft and deep X-ray lithography (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Biconically-tapered optical fiber probes for the measurement of esophageal pressure (Articolo in rivista) (Prodotto della ricerca)
- Piezoelectric transducers for real-time evaluation of fruit firmness. Part I:Theory and development of acoustic techniques (Articolo in rivista) (Prodotto della ricerca)
- Piezoelectric transducers for real-time evaluation of fruit firmness. Part II: Statistical and sorting analysis (Articolo in rivista) (Prodotto della ricerca)
- Design, characterization and perspectives of shape memory alloy elements in miniature sensor proof of concept (Articolo in rivista) (Prodotto della ricerca)
- Investigation of sol-gel prepared Ga-Zn oxide thin films for oxygen gas sensing (Articolo in rivista) (Prodotto della ricerca)
- Design and analysis of integrated flow sensors by means of a two-dimensional finite element model (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Ferromagnetic shape memory alloys: Scientific and applied aspects. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Triple coupled cantilever systems for mass detection and localization (Articolo in rivista) (Prodotto della ricerca)
- Alternative label
- Sensors and actuators A (literal)
- Sensors and actuators. (literal)
- Sens. actuators, A, Phys. (literal)
- Language
- eng (literal)
- Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#issn
- 0924-4247 (literal)
- Preferred label
- Sensors and actuators. A, Physical (literal)
- Publisher
- Elsevier Sequoia Lausanne : CHE (literal)
Incoming links:
- Rivista
- Giant resistivity change induced by strain in a composite of conducting particles in an elastomer matrix (Articolo in rivista) (Prodotto della ricerca)
- Electrochemical etching in HF solution for silicon micromachining (Articolo in rivista) (Prodotto della ricerca)
- Design and analysis of integrated flow sensors by means of a two-dimensional finite element model (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Modeling and characterization of piezoelectric transducers by means of scattering parameters. Part I: Theory (Articolo in rivista) (Prodotto della ricerca)
- Modeling and characterization of piezoelectric transducers by means of scattering parameters. Part II: Application on colloidal suspension monitoring (Articolo in rivista) (Prodotto della ricerca)
- Electromechanical characterisation of dielectric elastomer planar actuator: comparative evaluation of different electrode materials and different counterloads (Articolo in rivista) (Prodotto della ricerca)
- Capacitive micromachined ultrasonic transducer with an open-cells structure (Articolo in rivista) (Prodotto della ricerca)
- A measurement technique for thermoelectric power of CMOS layers at the wafer level (Articolo in rivista) (Prodotto della ricerca)
- Flexible tag datalogger for food logistics (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effects of gas type on the sensitivity and transition pressure of integrated thermal flow sensors (Articolo in rivista) (Prodotto della ricerca)
- Measurements and modeling of pulsed mode flow meter for liquids based on a single chip probe (Articolo in rivista) (Prodotto della ricerca)
- The high potential of shape memory alloys in developing miniature mechanical devices: a review on shape memory alloy mini-actuators (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- High temperature characterization of GaN-based photodetectors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Environmental monitoring system compliant with the IEEE 1451 standard and featuring a simplified transducer interface (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A flow sensor for liquids based on a single temperature sensor operated in pulsed mode (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Sensitivity improvement of integrated thermal anemometers obtained by jet flow impingement (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A double heater integrated gas flow sensor with thermal feedback (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Ferromagnetic shape memory alloys: Scientific and applied aspects. (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Dual frequency PECVD silicon nitride for fabrication of CMUTs' membranes (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Accurate high-resolution fiber-optic distributed strain measurements for structural health monitoring (Articolo in rivista) (Prodotto della ricerca)
- Investigation of sol-gel prepared Ga-Zn oxide thin films for oxygen gas sensing (Articolo in rivista) (Prodotto della ricerca)
- On the relationship between the temperature coefficient of resistance and the thermal conductance of integrated metal resistors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Offset Voltage Evaluation of Analog Blocks in a Configurable Mixed Architecture for Smart Capacitive Sensor Applications (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Flexible PVDF-TrFE pyroelectric sensor driven by polysilicon thin film transistor fabricated on ultra-thin polyimide substrate (Articolo in rivista) (Prodotto della ricerca)
- A study of highly c-axis oriented AlN films for diamond-based surface acoustic wave devices: Bulk structure and surface morphology (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Magnetoelastic sensor application in civil buildings monitoring (Articolo in rivista) (Prodotto della ricerca)
- Thermal characterization of a microheater for micromachined gas sensors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- An extended-range fibre optic pH sensor (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Fiber Bragg Grating sensors to measure the coefficient of thermal expansion of polymers at cryogenic temperatures (Articolo in rivista) (Prodotto della ricerca)
- Biconically-tapered optical fiber probes for the measurement of esophageal pressure (Articolo in rivista) (Prodotto della ricerca)
- An optical-fiber sensor for the measurement of the size and density of monodisperse particulates (Articolo in rivista) (Prodotto della ricerca)
- Growth of piezoelectric thin films with fine grain microstructure by high energy pulsed laser deposition (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Piezoelectric transducers for real-time evaluation of fruit firmness. Part II: Statistical and sorting analysis (Articolo in rivista) (Prodotto della ricerca)
- Automatic compensation of pressure effects on smart flow sensors in the analog and digital domain (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Piezoelectric transducers for real-time evaluation of fruit firmness. Part I:Theory and development of acoustic techniques (Articolo in rivista) (Prodotto della ricerca)
- Numerical study of a ferrule-top cantilever optical fiber sensor for wind-tunnel applications and comparison with experimental results (Articolo in rivista) (Prodotto della ricerca)
- Design, characterization and perspectives of shape memory alloy elements in miniature sensor proof of concept (Articolo in rivista) (Prodotto della ricerca)
- Thermal conductivity detector compact Spice model based on experimental measurements and 3D simulations (Articolo in rivista) (Prodotto della ricerca)
- Magneto-piezoresistance in Magnetorheological elastomers for magnetic induction gradient or position sensors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Microfabrication of sharp blazed gratings by a two-step height amplification process based on soft and deep X-ray lithography (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Triple coupled cantilever systems for mass detection and localization (Articolo in rivista) (Prodotto della ricerca)
- Real time oil control by surface plasmon resonance transduction methodology (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)