Porcelain stoneware large slabs: processing and technological properties (Contributo in atti di convegno)

Type

• Contributo in atti di convegno (Classe)
• Prodotto della ricerca (Classe)

Label

• Porcelain stoneware large slabs: processing and technological properties (Contributo in atti di convegno) (literal)

Anno

• 2010-01-01T00:00:00+01:00 (literal)

Alternative label

• Zanelli C.; Raimondo M.; Guarini G.; Marani F.; Fossa L.; Dondi M. (2010)
  Porcelain stoneware large slabs: processing and technological properties
  in 11th World Congress on Ceramic Tile Quality, Castellon (Spagna)
  (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori

• Zanelli C.; Raimondo M.; Guarini G.; Marani F.; Fossa L.; Dondi M. (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#note

• In: QUALICER 2010 - 11th World Congress on Ceramic Tile Quality (Castellon (Spagna), 15-16 February 2010). Proceedings, article n. 2010137. QUALICER - Camara de Comercio de Castellon, 2010. (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#descrizioneSinteticaDelProdotto

• ABSTRACT: Porcelain stoneware large slabs, up to 360x120 cm and 3 mm thick, can be bent and used in several applications, from building and construction (floorings, wall coverings, ventilated façades, tunnels, insulating paneling) to indoor furniture (e.g. table tops, doors, panels). Large slabs are manufactured through an innovative ceramic process, starting either from conventional or pre-milled raw materials and involving wet ball mixing, powder granulation by spray drying, forming by special purpose presses, a single stage of fast drying and firing, peaking at about 1200°C, and finishing (trimming, lapping, functionalization). Industrial samples were selected in order to investigate their technological performances as well as compositional and microstructural features. The following characteristics were determined: water absorption, open and closed porosity, bulk density; phase composition; mechanical properties (modulus of rupture, Young modulus, fracture toughness); resistance to (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni

• CNR-ISTEC, Faenza, SYSTEM, Fiorano Modenese, Italy (literal)

Titolo

• Porcelain stoneware large slabs: processing and technological properties (literal)

Prodotto di

• Institute of science and technology for ceramics (ISTEC) (Istituto)
• Ricerca e sviluppo di materiali e sistemi ceramici innovativi per edilizia, usi domestici e industriali (SP.P01.034.001) (Modulo)

Autore CNR

• MARIAROSA RAIMONDO (Persona)
• CHIARA ZANELLI (Persona)
• MICHELE DONDI (Unità di personale interno)
• GUIA GUARINI (Persona)

Insieme di parole chiave

• Parole chiave di "Porcelain stoneware large slabs: processing and technological properties" (Insieme di parole chiave)

Incoming links:

Prodotto

• Institute of science and technology for ceramics (ISTEC) (Istituto)
• Ricerca e sviluppo di materiali e sistemi ceramici innovativi per edilizia, usi domestici e industriali (SP.P01.034.001) (Modulo)

Autore CNR di

• MICHELE DONDI (Unità di personale interno)
• MARIAROSA RAIMONDO (Persona)
• CHIARA ZANELLI (Persona)
• GUIA GUARINI (Persona)

Insieme di parole chiave di

• Parole chiave di "Porcelain stoneware large slabs: processing and technological properties" (Insieme di parole chiave)