Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics designed for aerospace application (Articolo in rivista)

Type
Label
  • Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics designed for aerospace application (Articolo in rivista) (literal)
Anno
  • 2007-01-01T00:00:00+01:00 (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#doi
  • 10.1111/j.1551-2916.2007.01589.x (literal)
Alternative label
  • Frederic Monteverde*; Luigi Scatteia** (2007)
    Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics designed for aerospace application
    in Journal of the American Ceramic Society
    (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori
  • Frederic Monteverde*; Luigi Scatteia** (literal)
Pagina inizio
  • 1130 (literal)
Pagina fine
  • 1138 (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#url
  • http://onlinelibrary.wiley.com/doi/10.1111/j.1551-2916.2007.01589.x/full (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroVolume
  • 90 (literal)
Rivista
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#pagineTotali
  • 9 (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroFascicolo
  • 4 (literal)
Note
  • ISI Web of Science (WOS) (literal)
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni
  • *CNR-ISTEC, Institute of Science and Technology for Ceramics, National Research Council 48018 Faenza, Italy **CIRA, Italian Aerospace Research Center, 81043 Capua, Italy (literal)
Titolo
  • Resistance to thermal shock and to oxidation of metal diborides-SiC ceramics designed for aerospace application (literal)
Abstract
  • Two SiC-containing metal diborides materials, classified in the ultra-high-temperature ceramics (UHTCs) group, were fabricated by hot-pressing. SiC, sinterability apart, promoted resistance to oxidation of the diboride matrices. Both the compositions, oxidized in air at 1450°C for 1200 min, had mass gains lower than 5 mg/cm2. Slight deviations from parabolic oxidation kinetics were seen. The resistance to thermal shock (TSR) was studied through the method of the retained flexure strength after water quenching (20°C of bath temperature). Experimental data showed that the (ZrB2+HfB2)–-SiC and the ZrB2-–SiC materials retained more than 70% of their initial mean flexure strength for thermal quenchs not exceeding 475 and 385°C, respectively. Certain key TSR properties (i.e. fracture strength and toughness, elastic modulus, and thermal expansion coefficient) are very similar for the two compositions. The observed superior critical thermal shock of the (ZrB2+HfB2)–-SiC composite was explained in terms of more favorable heat transfer parameters conditions that induce less severe thermal gradients across the specimens of small dimensions (i.e. bars 25 mm x 2.5 mm x 2 mm) during the quench down in water. The experimental TSRs are expected to approach the calculated R values (196 and 218 °C for ZrB2+HfB2–-SiC and ZrB2-–SiC, respectively) as the specimen size increases. (literal)
Prodotto di
Autore CNR
Insieme di parole chiave

Incoming links:


Prodotto
Autore CNR di
Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#rivistaDi
Insieme di parole chiave di
data.CNR.it