Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing (Contributo in atti di convegno)

Type

• Prodotto della ricerca (Classe)
• Contributo in atti di convegno (Classe)

Label

• Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing (Contributo in atti di convegno) (literal)

Anno

• 2012-01-01T00:00:00+01:00 (literal)

Alternative label

• Negri M.; Gavric I.; Marra M.; Fellin M.; Ceccotti A. (2012)
  Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing
  in 2012 Negri M, Gavric I, Marra M., Ceccotti A. Using low quality timber for x-lam: raw material characterisation and structural performance of walls under semi-dynamic testing. In: World Conference on Timber Engineering. Timber Engineering Challenges and Solutions, Auckland, New Zealand,, 16-19 July 2012
  (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori

• Negri M.; Gavric I.; Marra M.; Fellin M.; Ceccotti A. (literal)

Pagina inizio

• 511 (literal)

Pagina fine

• 518 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#url

• http://www.scopus.com/inward/record.url?eid=2-s2.0-84871987374&partnerID=q2rCbXpz (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#numeroVolume

• 1 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#volumeInCollana

• 1 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#pagineTotali

• 7 (literal)

Note

• Scopu (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni

• FOXLAB, Via Mach 1, 38010 San Michele all'Adige, Italy; DICAR - Department of Civil Engineering and Architecture, University of Trieste, Piazzale Europa 1, I-34127 (TS), Italy; University of Padova, Department of Land, Environment, Agriculture and Forestry, Viale deirUniversità, 16, I-35020 - Legnaro (PD), Italy; CNR IVALSA Trees and Timber Institute, National Research Council, Via Biasi 75, I-38010 (TN), Italy (literal)

Titolo

• Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#isbn

• 9781622763054 (literal)

Abstract

• X-Lam panels are normally produced in Europe with sawn timber of S10 strength grade according to German DIN standards. Those panels provide excellent structural performance; that is, they exhibit excellent stiffness and strength properties. In fact, for many structural conditions the performance exceeds demand and hence the panels can be considered to be oversized. Consequently the possibility of using low quality timber for X-Lam panels was envisaged. In this paper, some of the results of current experimental program at CNR IVALSA on X-Lam wall panels made of low quality timber are presented and discussed. (literal)

Prodotto di

• Prodotti e sistemi di produzione: processi industriali legno NEGRI (SP.P01.032.001) (Modulo)

Autore CNR

• MARIO MARRA (Unità di personale interno)
• ARIO CECCOTTI (Persona)
• MARTINO NEGRI (Unità di personale interno)
• MARCO FELLIN (Unità di personale esterno)

Insieme di parole chiave

• Parole chiave di "Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing" (Insieme di parole chiave)

Incoming links:

Autore CNR di

• MARTINO NEGRI (Unità di personale interno)
• MARIO MARRA (Unità di personale interno)
• MARCO FELLIN (Unità di personale esterno)
• ARIO CECCOTTI (Persona)

Prodotto

• Prodotti e sistemi di produzione: processi industriali legno NEGRI (SP.P01.032.001) (Modulo)

Insieme di parole chiave di

• Parole chiave di "Using low quality timber for X-LAM: Raw material characterisation and structural performance of walls under semi-dynamic testing" (Insieme di parole chiave)