http://www.cnr.it/ontology/cnr/individuo/prodotto/ID142783

Membrane Emulsification: Principles and Applications (Contributo in volume (capitolo o saggio))

Type

Prodotto della ricerca (Classe)
Contributo in volume (capitolo o saggio) (Classe)

Label

Membrane Emulsification: Principles and Applications (Contributo in volume (capitolo o saggio)) (literal)

Anno

2009-01-01T00:00:00+01:00 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#doi

10.1002/9783527626779.ch21 (literal)

Alternative label

Giorno, L., De Luca, G., Figoli, A., Piacentini, E., Drioli, E. (2009)
Membrane Emulsification: Principles and Applications
Wiley-VCH - Weinheim, Wheinheim (Germania) in Membrane Operations. Innovative separations and transformations, 2009
(literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#autori

Giorno, L., De Luca, G., Figoli, A., Piacentini, E., Drioli, E. (literal)

Pagina inizio

463 (literal)

Pagina fine

497 (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#titoloVolume

Membrane Operations. Innovative separations and transformations (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#affiliazioni

ITM-CNR (literal)

Titolo

Membrane Emulsification: Principles and Applications (literal)

Http://www.cnr.it/ontology/cnr/pubblicazioni.owl#isbn

978-3-527-32038-7 (literal)

Abstract

Emulsions and suspensions are colloidal dispersions of two or more immiscible phases in which one phase (disperse or internal phase) is dispersed as droplets or particles into another phase (continuous or dispersant phase). Therefore, various types of colloidal systems can be obtained. For example, oil/water and water/oil single emulsions can be prepared, as well as so-called multiple emulsions, which involve the preliminary emulsification of two phases (e.g., w/o or o/w), followed by secondary emulsification into a third phase leading to a three-phase mixture, such as w/o/w or o/w/o. Suspensions where a solid phase is dispersed into a liquid phase can also be obtained. In this case, solid particles can be (i) microspheres, for example, spherical particles composed of various natural and synthetic materials with diameters in the micrometer range: solid lipid microspheres, albumin microspheres, polymer microspheres; and (ii) capsules, for example, small, coated particles loaded with a solid, a liquid, a solid-liquid dispersion or solid-gas dispersion. Aerosols, where the internal phase is constituted by a solid or a liquid phase dispersed in air as a continuous phase, represent another type of colloidal system. In emulsions and suspensions, disperse phase dimensions may vary from the molecular state to the coarse (visible) dispersion. They are commonly encountered in various productions. The average droplet/microcapsules size distribution is a key feature since they determine emulsions/suspensions properties for the intended uses and stability. For large-scale emulsion production, the most commonly employed methods are based on techniques aiming at establishing a turbulent regime in the fluid mixtures. These turbulent flows cannot be controlled or generated uniformly. The consequences are that the control of the droplet sizes is difficult and wide size distributions are commonly obtained, therefore the energy is used inefficiently in these technologies. In addition, the process scale-up is extremely difficult. The use of the ultrasonic bath yields better results with respects to the mentioned procedures, however, the control of the droplet dimension is still not optimal. For these reasons, recently much attention has been put in alternative emulsification processes, such as the membrane emulsification (ME). Membrane emulsification is an appropriate technology for production of single and multiple emulsions and suspension. It was proposed for the first time at the 1988 Autumn Conference of the Society of Chemical Engineering, Japan. Since then, the method has continued to attract attention in particular in Japan, but also in Europe [1-10]. In the early 1990s, Nakashima et al. [2] introduced membrane technology in emulsions preparation by a direct emulsification method, whereas, in the late 1990s, Suzuki et al. used premix membrane emulsification to obtain production rates higher than other membrane emulsification methods [11]. The fast progress in microengineering and semiconductor technology led at the development of microchannels, that Nakajima et al. applied in emulsification technology [12]. The distinguishing feature of membrane emulsification technique is that droplet size is controlled primarily by the choice of the membrane, its microchannel structure and few process parameters, which can be used to tune droplets and emulsion properties. Comparing to the conventional emulsification processes, the membrane emulsification permits a better control of droplet-size distribution to be obtained, low energy, and materials consumption, modular and easy scale-up. Nevertheless, productivity (m3/day) is much lower, and therefore the challenge in the future is the development of new membranes and modules to keep the known advantages and maximize productivity. Considerable progress has been achieved in understanding the technology from the experimental point of view, with the establishment of many empirical correlations. On the other hand, their theoretical interpretation by means of reliable models is not accordingly advanced. The first model devoted to membrane emulsification, based on a torque balance, was proposed in 1998 by Peng and Williams [13], that is, ten years later the first experimental work was published, and still nowadays, a theoretical study aiming at a specific description of the premix membrane emulsification process is not available. The nonsynergistic progress of the theoretical understanding with the experimental achievements, did not refrain the technology application at the productive scale. In particular, membrane emulsification was successfully applied for preparation of emulsions and capsules having a high degree of droplet-size uniformity, obtained with low mechanical stress input [14-16]. Therefore, the application of membrane emulsification extended to various fields, such as drug delivery, biomedicine, food, cosmetics, plastics, chemistry, and some of these applications are now being developed at the commercial level. Their scale vary from large plants in the food industry, to medium-scale use in the polymer industry, and to laboratory-bench scale in biomedicine. In this chapter, the experimental and theoretical bases as well as the applications of the technology will be discussed. (literal)

Editore