ASME-American Society Of Mechanical Engineers
- Label
- ASME-American Society Of Mechanical Engineers (literal)
- ASME-American Society Of Mechanical Engineers (literal)
- Editore di
- A Survey of Computer-Aided Modeling Tools for Aesthetic Design (Articolo in rivista) (Prodotto della ricerca)
- Available and Future Gas Turbine Power Augmentation Technologies: Techno-Economic Analysis in Selected Climatic Conditions (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Influence of the air-path operating parameters on the low temperature combustion in a single-cylinder Diesel engine (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Feasibility Study of a Novel Micro-Handling Device Based on Smart Materials (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Numerical investigation of wave-body interactions in shallow water (Contributo in atti di convegno) (Prodotto della ricerca)
- Innovative lift direct command to inner hydraulic circuit injector comparison for Diesel engines (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Multiscale modelling of electrical contacts using domain decomposition (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Study of the rate limiting step of the cathodic process in anode supported solid oxide fuel cell (Articolo in rivista) (Prodotto della ricerca)
- Downsizing of SI engines by turbo-charging (Contributo in atti di convegno) (Prodotto della ricerca)
- Compressor Fouling Modelling: Relationship Between Computational Roughness And Gas Turbine Operation Time (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Eco-friendly screen-printing inks of gadolinia doped ceria (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Influence of the temperature on oxygen reduction on SOFC composite electrodes: Theoretical and experimental analysis (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Analysis of temperature and residence time of the exhausts in the combustion chamber of an incinerator plant (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Numerical simulations by detailed chemistry and experimental measurements of Diesel combustion in a light duty common rail direct injection engine (Contributo in atti di convegno) (Prodotto della ricerca)
- Modeling of an electromechanical engine valve actuator based on a hybrid analytical-FEM approach (Articolo in rivista) (Prodotto della ricerca)
- Level-set computations of free surface rotational flows (Articolo in rivista) (Prodotto della ricerca)
- Performance evaluation of the integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle (Articolo in rivista) (Prodotto della ricerca)
- Process parameter effects on dimensional accuracy of micro-injection moulded part (Articolo in rivista) (Prodotto della ricerca)
- Smoothed Particle Hydrodynamics: Benchmarking on Selected Test Cases Within the NextMuSE Initiative (Contributo in atti di convegno) (Prodotto della ricerca)
- A Classification of Shallow Water Resonant Sloshing in a Rectangular Tank (Contributo in atti di convegno) (Prodotto della ricerca)
- Transient flow forces estimation on the pilot stage of a hydraulic valve (Contributo in atti di convegno) (Prodotto della ricerca)
- SPH Multiphase Simulation of Bubbly Flows: Towards Oil and Water Separation (Contributo in atti di convegno) (Prodotto della ricerca)
- Contrast of Pressure and Flow Compensated Pumps (Contributo in atti di convegno) (Prodotto della ricerca)
- Electronic Hybrid Limiter (EHL) for Pump Displacement (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- A level-set technique applied to complex free surface flows (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Job dispatching and monitoring in a mass-customisation environment (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Evaluation of micro-EDM milling performance using pulse discrimination (Contributo in atti di convegno) (Prodotto della ricerca)
- Manufacturing practices in dynamic markets-reconfigurability to enable a service-based manufacturing capacity supply (Contributo in atti di convegno) (Prodotto della ricerca)
- New Fault Tolerant Hydraulic Valve for Safety Critical Applications (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- A systematic approach to estimate the impact of the aerodynamic force induced by rotating stall in a vaneless diffuser on the rotordynamic behavior of centrifugal compressors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Model-based Soft Landing Control of an Electromechanical Engine Valve Actuator (Contributo in atti di convegno) (Prodotto della ricerca)
- Numerical Analysis of Lateral Forces Acting on Spools of Hydraulic Components (Contributo in atti di convegno) (Prodotto della ricerca)
- Performance evaluation methods for microgrippers (Contributo in atti di convegno) (Prodotto della ricerca)
- Development of Impedance Control Based Strategies for Light-Weight Manipulator Applications Involving Compliant Interacting Environments and Compliant Bases (Contributo in atti di convegno) (Prodotto della ricerca)
- A hybrid models deformation tool for free-form shapes manipulation (Contributo in atti di convegno) (Prodotto della ricerca)
- Effects due to the temperature measurement section on the performance estimation of a centrifugal compressor stage (Articolo in rivista) (Prodotto della ricerca)
- Fully free-form deformation features (d-F4) incorporating discontinuities (Contributo in atti di convegno) (Prodotto della ricerca)
- From CAD models to F.E. simulations through a feature-based approach (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Modeling atomization of high-pressure Diesel sprays (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A VERSATILE FULLY SUBMERSIBLE STEREO-PIV PROBE FOR TOW TANK APPLICATIONS (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- An investigation on low-temeprature fluidized combustion of liquid fuels (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Model-based control of the air fuel ratio for gasoline direct injection engines via advanced co-simulation: an approach to reduce the development cycle of engine control systems (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Processing Free Form Objects within a Product Development Process Framework (Contributo in volume (capitolo o saggio)) (Prodotto della ricerca)
- MEAs for polymer electrolyte fuel cell (PEFC) working at medium temperature (Articolo in rivista) (Prodotto della ricerca)
- In-cylinder fuel-air mixture investigation by Particle Image Velocimetry in a GDI engine (Contributo in atti di convegno) (Prodotto della ricerca)
- Effects of Surface Tension in the Near Field Wave Breaking of Ships (Contributo in atti di convegno) (Prodotto della ricerca)
- Effects of injection moulding parameters on dimensional accuracy of POM/MWCNT micro parts (Contributo in atti di convegno) (Prodotto della ricerca)
- Analysis of the Flow Past a Fully Appended Hull with Propellers by Computational and Experimental Fluid Dynamics (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Combustion of Waste Fuel in Sound Assisted Fluidized Bed (Contributo in atti di convegno) (Prodotto della ricerca)
- Gas-mixing in bubbling fluidized bed combustors: Hydrodynamics and macromixing associated with bubble bursting at the bed surface (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Preferred label
- ASME-American Society Of Mechanical Engineers, New York (USA) (literal)
- ASME-American Society Of Mechanical Engineers, New York (USA) (literal)
Incoming links:
- Editore
- Downsizing of SI engines by turbo-charging (Contributo in atti di convegno) (Prodotto della ricerca)
- Analysis of temperature and residence time of the exhausts in the combustion chamber of an incinerator plant (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Job dispatching and monitoring in a mass-customisation environment (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Manufacturing practices in dynamic markets-reconfigurability to enable a service-based manufacturing capacity supply (Contributo in atti di convegno) (Prodotto della ricerca)
- A hybrid models deformation tool for free-form shapes manipulation (Contributo in atti di convegno) (Prodotto della ricerca)
- Innovative lift direct command to inner hydraulic circuit injector comparison for Diesel engines (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- In-cylinder fuel-air mixture investigation by Particle Image Velocimetry in a GDI engine (Contributo in atti di convegno) (Prodotto della ricerca)
- Feasibility Study of a Novel Micro-Handling Device Based on Smart Materials (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Modeling atomization of high-pressure Diesel sprays (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Analysis of the Flow Past a Fully Appended Hull with Propellers by Computational and Experimental Fluid Dynamics (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Influence of the temperature on oxygen reduction on SOFC composite electrodes: Theoretical and experimental analysis (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Modeling of an electromechanical engine valve actuator based on a hybrid analytical-FEM approach (Articolo in rivista) (Prodotto della ricerca)
- Model-based control of the air fuel ratio for gasoline direct injection engines via advanced co-simulation: an approach to reduce the development cycle of engine control systems (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Study of the rate limiting step of the cathodic process in anode supported solid oxide fuel cell (Articolo in rivista) (Prodotto della ricerca)
- MEAs for polymer electrolyte fuel cell (PEFC) working at medium temperature (Articolo in rivista) (Prodotto della ricerca)
- Eco-friendly screen-printing inks of gadolinia doped ceria (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- A Survey of Computer-Aided Modeling Tools for Aesthetic Design (Articolo in rivista) (Prodotto della ricerca)
- Numerical simulations by detailed chemistry and experimental measurements of Diesel combustion in a light duty common rail direct injection engine (Contributo in atti di convegno) (Prodotto della ricerca)
- Influence of the air-path operating parameters on the low temperature combustion in a single-cylinder Diesel engine (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- From CAD models to F.E. simulations through a feature-based approach (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Fully free-form deformation features (d-F4) incorporating discontinuities (Contributo in atti di convegno) (Prodotto della ricerca)
- Level-set computations of free surface rotational flows (Articolo in rivista) (Prodotto della ricerca)
- Model-based Soft Landing Control of an Electromechanical Engine Valve Actuator (Contributo in atti di convegno) (Prodotto della ricerca)
- Compressor Fouling Modelling: Relationship Between Computational Roughness And Gas Turbine Operation Time (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Combustion of Waste Fuel in Sound Assisted Fluidized Bed (Contributo in atti di convegno) (Prodotto della ricerca)
- Performance evaluation of the integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle (Articolo in rivista) (Prodotto della ricerca)
- Available and Future Gas Turbine Power Augmentation Technologies: Techno-Economic Analysis in Selected Climatic Conditions (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Effects due to the temperature measurement section on the performance estimation of a centrifugal compressor stage (Articolo in rivista) (Prodotto della ricerca)
- A VERSATILE FULLY SUBMERSIBLE STEREO-PIV PROBE FOR TOW TANK APPLICATIONS (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Numerical Analysis of Lateral Forces Acting on Spools of Hydraulic Components (Contributo in atti di convegno) (Prodotto della ricerca)
- Process parameter effects on dimensional accuracy of micro-injection moulded part (Articolo in rivista) (Prodotto della ricerca)
- An investigation on low-temeprature fluidized combustion of liquid fuels (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- SPH Multiphase Simulation of Bubbly Flows: Towards Oil and Water Separation (Contributo in atti di convegno) (Prodotto della ricerca)
- Smoothed Particle Hydrodynamics: Benchmarking on Selected Test Cases Within the NextMuSE Initiative (Contributo in atti di convegno) (Prodotto della ricerca)
- A Classification of Shallow Water Resonant Sloshing in a Rectangular Tank (Contributo in atti di convegno) (Prodotto della ricerca)
- Contrast of Pressure and Flow Compensated Pumps (Contributo in atti di convegno) (Prodotto della ricerca)
- Electronic Hybrid Limiter (EHL) for Pump Displacement (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Transient flow forces estimation on the pilot stage of a hydraulic valve (Contributo in atti di convegno) (Prodotto della ricerca)
- Gas-mixing in bubbling fluidized bed combustors: Hydrodynamics and macromixing associated with bubble bursting at the bed surface (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Multiscale modelling of electrical contacts using domain decomposition (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Effects of Surface Tension in the Near Field Wave Breaking of Ships (Contributo in atti di convegno) (Prodotto della ricerca)
- A level-set technique applied to complex free surface flows (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- A systematic approach to estimate the impact of the aerodynamic force induced by rotating stall in a vaneless diffuser on the rotordynamic behavior of centrifugal compressors (Articolo in rivista) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1101)
- Evaluation of micro-EDM milling performance using pulse discrimination (Contributo in atti di convegno) (Prodotto della ricerca)
- Effects of injection moulding parameters on dimensional accuracy of POM/MWCNT micro parts (Contributo in atti di convegno) (Prodotto della ricerca)
- Numerical investigation of wave-body interactions in shallow water (Contributo in atti di convegno) (Prodotto della ricerca)
- Processing Free Form Objects within a Product Development Process Framework (Contributo in volume (capitolo o saggio)) (Prodotto della ricerca)
- New Fault Tolerant Hydraulic Valve for Safety Critical Applications (Contributo in atti di convegno) (http://www.cnr.it/ontology/cnr/individuo/prodotto/TIPO1301)
- Development of Impedance Control Based Strategies for Light-Weight Manipulator Applications Involving Compliant Interacting Environments and Compliant Bases (Contributo in atti di convegno) (Prodotto della ricerca)
- Performance evaluation methods for microgrippers (Contributo in atti di convegno) (Prodotto della ricerca)